Overview - 4-Channel Automotive Tester/Diagnostic Oscilloscope
This 4-channel, 60 MHz automotive diagnostics oscilloscope has a wide input voltage range from 8 to 36 V, making it suitable for vehicle power tests. It has vehicle diagnosis functions; more than 20 kinds of automatic measurement functions, automatic cursor tracking measurements, as well as, fast Fourier transform (FFT) spectrum analysis. It is powered directly from the USB port of a computer, so this kit can be used either in the workshop or on the road to test and measure virtually all of the electrical and electronic components and systems in motor vehicles.
Key Features - 4-Channel Automotive Tester/Diagnostic Oscilloscope
� Channels and EXT trigger, 60 MHz Bandwidth
•Plug and play, no external power required
�00 MS/s real-time sampling rate, 10 kb to 16 MB memory depth per channel
� to 36 V input voltage, suitable for vehicle power tests
•USB 2.0 interface, LAN and WIFI are optional
•More than 20 kinds of automatic measurement functions, PASS/FAIL check functions
•Built-in fast Fourier transform (FFT) spectrum analysis
•Co***tible with Windows NT/2000/XP/Vista and Windows 7
Technical Specifications - 4-Channel Automotive Tester/Diagnostic Oscilloscope
Input
Max. Sample Rate
200 MS/s (Single Channel)
100 MS/s (Dual Channels)
Channels
4 Channels
Bandwidth
60 MHz (-3 dB)
Vertical Resolution
8 bits/channel
Gain Range
10 mV to 5 V/div at x 1 probe(10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V/div1, 2, 5 sequence)
100 mV to 50 V/div at x 10 probe
1 V to 500 V/div at x 100 probe
10 V to 5 kV/div at x 1000 probe
200 mV to 100 V/div at 20 : 1
Range
8 divisions
Offset Level
± 4 divisions
Coupling
AC, DC,GND
Offset Increments
0.02 div
Impedance
1 M ohm
DC Accuracy
± 3%
Input Protection
35 Vpk (DC + peak AC < 10 kHz, without external attenuation)
Display Mode
Y-T, X-Y
Time Base
Time Base Range
5 ns/div to 1000 s/div(1- |
Home
